Product Category

Semiconductor Material

Your location: Home > Semiconductor Material > Molding Material

Forming diagram

Level	Plaskon-C （Compression type）
Appearance	Milky white
Plaskon density	1.0g-1.3g/cm3
Specific gravity of Plaskon	1.4-1.6
Flow	80-100mm a)
Hardness after curing	>70 b)
Apply	mold openings, mold cavities, vent holes, mold surfaces

a）Analysis using JIS K6911 method

b）Analysis using Shore-Hardness Meter D (mold temperature: 170 ℃ molding pressure: 6.9 Mpa)
Size: 73mm (L) x 38mm (W) x 7mm (H) Weight: 20g